Position: Home > Gabion mesh > Welded Mesh Gabion >  Text
Gabions manufactured from dimensionally stable panels of mesh that are formed by welding transverse and longitudinal wires at each and every intersection to form a grid. The gabion box is then part assembled by hinging the face, back, sides and internal diaphragms to the base panel and the lid to the rear panel with rings or clips. The units are transported to site flat packed with lacing wire as standard for on site erection. On site, the unit is opened out in the required position and the sides, diaphragms, face and rear panels are rotated to the vertical position and joined with a continuous lacing operation (wire supplied as standard) using helicals or rings (supplied at additional cost). Joints between courses are normally continuously laced or clipped with rings. Once assembled, the gabions are filled with stone or rock and the lid secured to form a monolithic structure in accordance with the recommended installation procedures.
Materials: Low- carbon steel wire, galvanized ( divide into galvanized after weaving and galvanized before weaving), PVC plastict, stainless steel.
Variety:Sack gabion ,Gabion Baskets ,Gabion Mats ,Reno mats ,heavy Type Hexagonal wire mesh
Applications:

  • Mass gravity retaining walls
  • Facing units to reinforced soil walls
  • Landfill
  • Perimeter walling
  • Acoustic barriers
  • River and coastal protection
  • Reed beds
  • Weirs
  • Abutments
  • Landscaping
  • Free standing walls
  • Temporary works 

Specification:
Welded mesh Gabion 39 System is available in mesh aperture 76.2mm x 76.2mm and in the following specifications to the nominal dimensions stated below. Other non standard mesh apertures are available on request. For further information download the product PDF.
Download a PDF: Enviro Mesh Gabions

Weld Mesh Modular Gabion 27 System
Materials: Low- carbon steel wire, galvanized ( divide into galvanized after weaving and galvanized before weaving), PVC plastict, stainless steel.
Variety:Sack gabion,Gabion Baskets ,Gabion Mats ,Reno mats,heavy Type Hexagonal wire mesh

The Gabion 27 System is a high quality product which can be quickly installed enabling reduced sectional wall design requirements. This combination of benefits, result in savings on labour costs, overall material supply and associated earthworks.
Gabion Construction
The Gabion 27 System comprises of units that are subdivided into 686mm cells along the length of the cage. Construction is such that the base of the gabion forms the lid of the unit below. The base is extended by fixed dimensions on one face to allow for a predetermined stepping arrangement at each course. The base on the other face is flush, allowing for a flush faced wall to be constructed if required or coursing with a combination of flush and stepped faces.


Typical Mass Gravity Wall Application

Reduced ConstructionTimes The use of combined lids and bases reduces the construction time, but does not compromise the structural integrity of the system.
Superior Design
The mesh weight to volume ratio is greater with this system than the Gabion 39 system and the distribution of mesh within the structure is more even thus producing a higher quality of installation. The face and rear panels are manufactured from a heavier mesh wire diameter to maintain both better linear and lateral alignment.
Applications

  • Mass gravity retaining walls - high quality installation
  • Facing units to reinforced soil walls
  • Perimeter walling
  • Acoustic barriers
  • Abutments
  • Landscaping
  • Trapezoidal gabions
  • Free standing walls
  • Cladding and rain screen
Case Studies
  • Stone Farm, Yeovil - Mass Gravity Retaining Wall Scheme


Gabion 27 System used as trapezoidal units

Gabion 27 System used as mass gravity walls


Web site:http://www.gabions-china.com


Get quick quotations from our related members by filling the Feedback Form below.
Company:
Contact:
FAX:
Email: